每100mm使用紧固螺丝安装导轨在无油漆的金属薄板上，确保在机柜或开放式机架内良好的机械稳定性和良好的机箱接地。如图4.该金属薄板至少应为2.5毫米厚的和至少180毫米高的好一长边弯曲90度，至少每500mm该金属薄板少采用四个螺钉机械地固定到机柜或机架。对于机柜框架的紧固应采用自攻螺钉来完成已获得接地连接效果。对于水平安装可以采用铝制板，铝制板有良好的接地和并使相关产品稳固安装。铝制板应该至少采用四个自攻螺钉固定在机柜内。铝制板上有凹槽使螺钉固定住高振动环境下运行的模件。
SUN CP2140-650 BLADE SYSTEM
MEIDEN IV18A AXP VME165
FORCE SPARC CPU-5CE/16 VME PROCESSOR BOARD
MOTOROLA MVME VME 162-202 Single Board
AVAL DATA AVME-115B VME
AVAL DATA AVME-335A VME
Zygo interferometer 70.01mm
Zygo 7003A retroreflector&7006A high stability PMI
Zygo 7003A retroreflector&7006A stability PMI&7024A
ZYGO 7005 SINGLE BEAM INT&POLARIZATION BEAMSPLITTER
ZYGO BEAM SPLITTER 50%LASER
CIS VCC-G20V30MIR MACHINE VISION CAMERA
ATMEL AVIIVA AT71-SM2CL1010-BA0 LINE SCAN CAMERA
Teli CS8340B Machinevision Camera
Teli CS8420i MACHINE VISION CAMERA
Teli CS8620i MACHINE VISION CAMERA
Suruga Seiki PG615-R24CG Linear Stage Positioner
MMT XY Linear Stage Positioner m2-927-l1
ATLAS COPCO DMC DMC310515 DIGITAL MOTION CONTROLLER
Zygo 7702 Laser Head 6mm pat:8070-0102-05
FANUC SERVO MOTOR 0.5KW A06B-0373-B577 FREE SHIP
KOLLMORGEN ServoStar SP CP306250 SERVO DRIVE
Omron NT620S-ST211-EK Operator Interface HMI
